Standard Series (B-Series)

Standardly equipped with new “NorthGlass Heating Temperature Control System” and “Standard Gapless Forced Convection System”, “Standard Symmetric Heating Technology”, B-series tempering furnace can significantly improve the glass quality & production efficiency, meanwhile reduce its energy consumption. It is the most valuable choice for all kinds of glass processors.

Advanced Series (A-Series)

Standardly equipped with “Advanced Gapless Forced Convection System”, “Intelligent Heating Control Module”, “Advanced Symmetric Heating Technology” and “Super Flat & Spotless Technology”, A-series tempering furnace can stably and efficiently toughen most glass varieties with slight deformation and light anisotropy. It is the best choice for the glass processing enterprises pursuing high glass quality, for their main tempering furnace.

Top Series (T-Series)

Standardly equipped with “Super Symmetric Heating Technology” and “Intelligent Heating Control Technology based on glass exit-chamber temperature”, T-series tempering furnace can produce ultra-high quality tempered glass, meanwhile ensure its large-scale, efficient and stable production. It is a wise choice for the domestic and international leading glass processing enterprises, for their industrial upgrading.

Continuous Glass Tempering Furnace

The continuous furnaces produced by NorthGlass hold a leading position in the market, with cumulative sales exceeding 300 units. They have obvious advantages in terms of production capacity, energy consumption, product quality and equipment stability, and are production equipment widely trusted by glass processing plants in the photovoltaic industry and other industries.

Low-E Coating Line

The vacuum coating horizontal coating line uses the magnetron sputtering process to deposit different kinds of materials on the substrate. It is mainly used for processing various types of Low-E glass, solar control glass, AR film glass, and other architectural glass, as well as for automotive glass coating and aluminum mirror coating.

Cathode

NorthGlass can offer you a complete rotary cathode and planar cathode system (incl. lid, gas distribution). The sputtering device can be customized for all new and existing coaters, which can facilitate customers to integrate with local and/or remote control (digital or analog).

Magnet Bar

The extruded aluminum support structure isolates the magnets and magnet yoke from the cooling water in the target tube, which can avoid variations in the magnetic field caused by prolonged exposure to water. Better rigidity of the magnet bar reduces fluctuations in the magnetic field caused by friction between the twisted magnet bar and target tube. The magnet homogeneity is easy to tune. Cooling water is ejected directly onto the high-temperature areas of the target, resulting in a better cooling effect. It is easy to install and maintain.

End Blocks

Provided are compact and standard types of end blocks with typical interfaces for good compatibility. The compact single-ended end block is smaller, requires less space, and has a lower cost, while the standard double-ended end block is more stable and easier to maintain. The embedded carbon brush design effectively increases the surface current and improves operational stability under high-power loads. The mechanical sealing prevents water leakage and ensures a longer service life. More than thousands of end blocks are installed and operating at customer sites worldwide.

Shuttle-type Glass Sheet Storage System

Features: Composed of a glass material rack, shuttle, track, lifting position, loading position, and control system. Suitable for mass production and can be used in conjunction with multiple cutting machines.

Drawer-type Raw Film Storage System

Features: Composed of a glass rack, independent wheels, tracks, and a control system. Suitable for production modes that require frequent switching between different types of glass for raw sheet cutting.

Gantry-type Glass Sheet Storage System

Features: Composed of a glass material rack, gantry frame, guide rails, lifting suction cups, and control system. Suitable for both mass production and production modes requiring frequent switching of glass types during raw sheet cutting; can connect to up to two cutting machines.

Glass Scrap Storage

Used to store glass scraps after cutting, it can be combined with North Glass software to manage and cut scrap pieces, avoiding unnecessary waste.

3-in-1 Glass Cutting Machine

Features: The upper cutting and slicing are integrated into one table, which takes up little space and is suitable for small-scale cutting operations.

conventional Cutting Machine

Features: Based on the optimization results, glass is loaded, cut, and slit (automatic slitting option available).

Horizontal Film Processing System

Features: Composed of a lifting conveyor, a glass sorting cage, a cage-side lifting trolley, and a control system, the glass can be horizontally stored in layers of grids, with the storage depth extending upwards to a maximum of 9 meters, significantly reducing the equipment's footprint. It serves as a buffer before tempering and can also be used in conjunction with a software system for automatic optimization of the tempering furnace arrangement.

Horizontal Wafer Loader

Features: Solves the problem of frequent opening and closing of the double-sided grinding, and improves grinding efficiency.

Vertical Edge Grinding and Cleaning Machine

Features: Composed of a grinding chamber, conveyor table, cleaning chamber, and control program. It uses resin-bonded diamond wheels to bevele the glass, eliminating the need for manual adjustment of glass size and thickness, and allowing for flexible spatial arrangement.

Vertical Film Handling System

Features: Composed of a shuttle car, sheet handling cage, cage bottom conveyor car, track, and control program. It serves as a buffer before or after tempering, and can also be used in conjunction with the North Glass software system for optimized furnace placement before tempering or sheet handling and pairing before hollow core tempering.

Automatic Furnace Tilting System Before Tempering

Features: Without sacrificing tempering quality, it can match order processing while achieving fully automatic sheet placement and optimized furnace placement rate before tempering.

Laser Marking Machine

Features: Composed of a crossbeam, laser marking machine, table frame, and control system. It can generate company logos, QR codes, barcodes, or 3C markings according to order requirements. It meets the needs of automated production lines while saving on the use of paper labels.

Independent Film Processor

Features: Composed of a glass sorting cage, a moving chassis, a measuring table, a conveyor table, and a control system. It uses a moving glass sorting cage to arrange and adjust the glass sequence; it can be used independently or in a connected line.

Automatic Chipping Machine

Features: Composed of a conveyor table, an XY-axis automatic slitting machine, and a control system. It can automatically slit and trim glass along the XY axis after cutting, and is widely used in industrial glass production lines.

Circular Wafer Scrambler

Features: Each piece of glass can be stored and retrieved individually in the horizontal racking machine, while glass can be categorized and retrieved in the circular sorting machine. Applications: Primarily used in the glass processing industry for electronics, home appliances, and sanitary ware for stacking, storage, and sorting, enabling stable and efficient automation of various processes.

Glass Processing Automation Line Solution A

Features: Fully automated plant solution, offering the most flexible production and processing modes. Production capacity is approximately 1000m²/shift, with 4-6 workers per shift (excluding the hollow core shift). All figures are subject to change based on the final actual configuration.

Glass Processing Automation Line Solution B

Features: An economical automated production line solution that enables pairing of tempered insulated glass units, with a small space requirement, suitable for retrofitting existing plants. Production capacity is approximately 1000m²/shift, requiring 4-6 workers per shift (excluding the insulated glass unit team). All figures are subject to change based on final configuration.

Glass Processing Automation Line Solution C

Features: An economical solution for complete plant automation, with a more compact space layout and relatively low investment costs. Production capacity is approximately 1000m²/shift, requiring 4-6 workers per shift (excluding the hollow core shift). All figures are subject to change based on the final actual configuration.

Structural Glass, 24 meters

With years of experience in producing extra-large glass, North Glass provides integrated solutions from design, production, transportation to installation. Its structural glass adopts a unique "V-shaped" splicing design, supports 14 different folding angles between 74° and 133°, and can be pre-embedded with various metal parts to meet the needs of complex buildings.

Bending Tempered Glass - Extra Large Bending Tempered glass

NorthGlass's ultra-long curved tempered glass can achieve an arc length of 16 meters, seamlessly integrating with the building's contours and curves, bringing a smooth visual experience, and is widely used in curved curtain walls and highly creative building facades.

Bent Tempered glass - Small Radius Tempered Glass

Small-radius curved tempered glass is characterized by its semi-circular tempered shape, with a minimum radius of 100mm. It is suitable for designs that require tight curvature and can play a unique role in architectural corners, domes, and small-radius structures, providing both aesthetic appeal and functionality.

Bent tempered Glass - Front and Back Bent Tempered glass

Reverse-curved tempered glass solves the problem of color consistency in curved curtain walls, maintaining a consistent visual effect from both the front and back, providing a superior option for double-sided displays and high-standard building projects.

Curved Tempered Glass - 3D Multi-curved Tempered Glass

3D multi-curved tempered glass features complex three-dimensional curved shapes, reaching up to 13 meters in height. It is suitable for innovative building structures, showcasing a high degree of design flexibility and giving buildings a unique spatial expression and artistry.

High-End Retail Glass

The "Clear and Transparent" series of Low-E insulating glass boasts excellent flatness, resulting in bright and transparent glass that perfectly complements the clean and simple design of high-end retail spaces. The glass staircase, designed as a "floating staircase," reflects the pursuit of quality and meticulous attention to detail, turning it into a work of art. The 7-meter-high pure glass structure, with its minimalist design and exquisite craftsmanship, reflects the blue sky, clear water, and dazzling lights, creating a striking visual experience.

Digital Printed Glass

Northglass has introduced advanced digital printing equipment, using digital printing technology to print inorganic high-temperature inks onto glass, followed by high-temperature sintering to permanently fix the ink to the glass surface. This results in strong resistance to acids and alkalis, as well as corrosion resistance. Technological innovation has created new possibilities.

Long-lasting Energy-saving Insulated Glass

The maximum processing size of fully automatic, long-lasting, energy-saving insulated glass is 3300mm x 7000mm, with an annual inert gas leakage rate of less than 0.1%. By eliminating butyl sealant overflow and employing cross-linked edge sealing technology, both glass performance and aesthetics are ensured, flatness is improved, and the pumping effect is suppressed. Furthermore, the warm-edge, visually interface-free design helps maintain the initial performance of the insulated glass over the long term.

"Flat and spotless" Tempered Glass

"Perfectly flat and spotless" is the ultimate goal pursued by tempered glass. North Glass's "perfectly flat and spotless" tempering technology allows float glass to maintain its original flatness and crystal clarity after tempering. It essentially eliminates wind spots and white fogging distortion phenomena that are difficult to eliminate in ordinary tempered glass, representing a revolution in glass tempering technology.

Crystal Glass

The use of specially developed high borosilicate materials gives North Glass's glazed glass superior strength, making its application in exterior curtain walls possible. North Glass's self-developed one-time casting equipment for glazed glass allows for more unique and textured projects. A single sheet can be fired to 18 square meters, with a single unit weighing 1.5 tons. North Glass's self-developed casting equipment has mass production capabilities. Customized surface textures and colors: North Glass provides customized surface texture solutions and uses a formula library to complete the color matching and production of multi-colored glazed glass.

The GASF series centrifugal fans

The GASF series centrifugal fans are high-flow medium and low-pressure fans. They are optimized fan varieties developed after the standard 4-72 and 4-73 fans are improved. They adopt FEA-assisted design to improve the reliability of the structure. The rear-bending centrifugal impeller meets aerodynamic characteristics, has high efficiency and is more stable in airflow. GASF series centrifugal fans can be widely used in general factories and large buildings for ventilation, boiler supply and suction, sintering furnace exhaust, environmentally friendly dust removal and exhaust, coating line painting system exhaust, industrial system air conditioning air, square, ship ventilation, etc. The gases conveyed by the standard model are air that cannot exceed 80℃ and other gases that are harmless to the human body and non-corrosive to steel. The gas is not allowed to contain viscous substances, and the dust and hard particles contained shall not exceed 80mg/m³. The fan shaft power will not exceed the motor rated power. It has the advantages of high efficiency and low noise. It can meet the working conditions that require high energy consumption, small size and weight requirements, and low noise requirements. Users can use it with confidence.

The XTF series high-pressure centrifugal fan

The XTF series high-pressure centrifugal fan is a new centrifugal fan developed by the Shenyang Blower Research Institute. XTF series high-pressure centrifugal fans belong to the category of medium flow and medium pressure, and belong to our company's high-efficiency series products. XTF series high-pressure centrifugal fans can be widely used as filter tempering furnace cooling air, boiler blower, smelting and exhaust fan, primary fan, secondary fan, dust removal fan for steel plant smelting and dust removal equipment, etc. It can also be used in mine ventilation systems and general ventilation systems. The XTF series standard fans with a pressure coefficient of 0.50~0.65 and a specific speed of 30~55 show its advantages of good performance, wide efficiency range and wide coverage. The standard model is used to transport air and gases that are non-corrosive, non-spontaneously ignited, and do not contain viscous substances. The temperature of the conveyed medium cannot exceed 80℃ and other gases that are harmless to the human body. The dust and hard particles contained in the medium shall not exceed 80mg/m³. The machine has low noise, flat performance curve, large flow adjustment area, high efficiency and low energy consumption, and has been well received by users.

The SFP series high-efficiency centrifugal fan

The SFP series high-efficiency centrifugal fans are the high-efficiency series fans independently developed by our company. This series of fans belongs to the category of medium flow and medium-high pressure. The SFP series can be widely used as blowers for boilers, induction fans, dust removal fans for dust removal equipment, special printer fans, etc. It can also be used in mine ventilation systems and general ventilation systems. The SFP series has a pressure coefficient of 0.5~0.7 and a specific speed range of 23~50. The series of products containing a pressure coefficient of 0.7 can be used instead of forward high-pressure fans. Under the same parameters, the noise can be reduced by 5dB (A) compared to the forward fans, which can meet the needs of low noise conditions. The standard model is used to transport air and gases that are non-corrosive, non-spontaneously ignited, and do not contain viscous substances. The temperature of the conveyed medium cannot exceed 80℃ and other gases that are harmless to the human body. The dust and hard particles contained in the medium shall not exceed 80mg/m³. The SFP series high-efficiency centrifugal fan model has a simple line and a gentle runner, which is suitable for environmentally friendly dust removal and exhaust; it can also be used for medium-pressure exhaust in various industries.

STB high-pressure small-flow series fan

As a high-pressure small-flow series fan, the pressure coefficient can reach 2. It is generally used as blowers and combustion-assisted fans for various industrial furnaces, and can also be used as quench and hair dryers for special occasions. The STB series fans can be used as a furnace smoke exhaust fan, a purge fan, a dust removal fan, etc. by changing the air inlet and impeller design without changing the overall results, size and parameters of the fan. This series of fans can also be used as blowers for various furnaces and forging furnaces, and can also be used to transport air and gases that are non-corrosive, non-spontaneous, and do not contain viscous substances. The temperature of the conveying medium shall not exceed 80℃, and the dust and hard particles contained in the medium shall not exceed 80mg/m³. The mechanical wear of high-pressure fans is very small, so they have a relatively long service life.

FCF series industrial centrifugal fan

FCF series industrial centrifugal fans are high-pressure and high-flow centrifugal fans, mainly composed of impellers, casings, air inlets, transmission groups, etc. Compared with the common 9-19 and 9-26 series, the FCF series of industrial centrifugal fans has high efficiency and wide efficiency zones, which can more effectively avoid performance degradation caused by deviations in working conditions during use, and can more effectively avoid surge areas in small flow ranges. It is generally used for forging furnaces and high-pressure forced ventilation, and can be used to transport materials, transport gases that are non-corrosive, non-spontaneous combustion, and do not contain sticky substances. The integral welded structure of the casing and box base, the stress is uniform during high-speed operation, and the operation is stable and reliable.

The SFL series energy-saving centrifugal fan

The SFL series energy-saving centrifugal fans are composed of casing, impeller, current collector and transmission parts. They are high-flow low-pressure fans. They are optimized fan varieties developed after the standard 4-79 fans are improved. They can be widely used in general factory and large-scale building ventilation, ship ventilation, kiln circulation air, cooler cooling air, industrial system air conditioning air, etc. The gases conveyed by the standard model are air that cannot exceed 80℃ and other gases that are harmless and non-corrosive to the human body. The gas is not allowed to contain sticky substances, and the dust and hard particles contained shall not exceed 80mg/m³. The high-reliability design reduces maintenance workload, has the performance advantages of high efficiency and low noise, and has obvious energy-saving effects.

Light-Stone Material

Lightweight Microcrystal Stone, abbreviated as Light-Stone, is a new-type building wall material made from silicon-based raw materials through integral high-temperature sintering. Its base layer is honeycomb-shaped, and the surface layer is microcrystal stone, which combines the sturdiness and elegance of stone with the characteristics of being lightweight and thermal insulating. The original panel has specifications of 1200x1600x100mm; it is produced in an environmentally friendly manner with no waste gas emissions and is 100% recyclable and reusable.

Light-Stone unit wall

The Light-Stone unit wall is a safe, reasonable, high-precision, and standardized prefabricated structural module formed by modular integration of light-stone and corrosion-resistant section steel. Processed and integrated in the factory, it can reach a specification of 6000mm, and is safe, precise, and lightweight, with convenient on-site hanging construction.

Light-Stone prefabricated house

The Light-Stone prefabricated house is a brand-new prefabricated house system innovatively developed on the basis of the light-stone unit wall. It uses load-bearing unit walls as structural panels, enabling the rapid completion of on-site construction. The house product exhibits the substantial feel of natural stone and is a brand-new low-rise building product integrating fire resistance, thermal insulation, environmentally friendly energy efficiency, safety, and comfort.

The three-layer single-chamber electric roller kiln

The three-layer single-chamber electric roller kiln integrates cross-industry and multidisciplinary technologies, achieving intelligent, automated, efficient, and high-quality production across all stages. It employs a pure electric heating system with three-layer same-chamber design and ultra-precise temperature control technology, ensuring emission-free operation with no waste gas, dust, or residues. This innovation provides comprehensive solutions for the production of sanitary/architectural/foamed ceramics, cast glass, Light-Stone, and other related industrial chain products, contributing to the realization of carbon neutrality in the industry.